Skip to content Skip to main navigation Report an accessibility issue

Work Zone Safety

Guidelines for Construction, Maintenance, Utility, and Incident Operations

front page   back page

TTAP routinely offers training which addresses the topics presented in the Work Zone Safety flipbook. If your staff requires work zone traffic control or flagger training, please view our training calendar to see a listing of scheduled classes. TTAP can also schedule on-site training to suit your schedule. Please contact Frank Brewer, TTAP's training coordinator (and work zone instructor), at (865) 974-8251 or for additional information about these classes.

The application diagrams shown in this booklet represent minimum requirements for typical situations. They are not intended as substitutes for engineering judgment and should be altered to fit the conditions of a particular site, keeping in mind that all traffic control devices used must be in compliance with Part 6 of the MUTCD. Under the authority granted by Tennessee Code Annotated 54-5-108(b), the Tennessee Department of Transportation has adopted the MUTCD to govern the design and location of signs, signals, markings, and for posting of traffic regulations on or along all streets and highways in Tennessee.

Information and Training Contact TTAP, your Local Technical Assistance Program (LTAP) center, for information or training on these guidelines.

Flip-books are $5.00 each.

Please click here to download the order form.